Neatech EVO3 Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 93

Neatech EVO3 Скачать руководство пользователя страница 19

www.neatech.it

19

2.6.5

Drive profile

As default in the wheelchair they are saved some different drive profile for the use indoor and
outdoor.
Additional profiles should be the result of customization for the individual user.
Use the button “PROFILE” of the joystick to change different types of profiles: they are sorted
from the more indoor one to the more outdoor one.
For each profiles it is possible to change the speed.

INDOOR PROFILES

When this profile is activated most of the parameters of the wheelchair are cut off. For example
the maximum speed and the acceleration are limited.
In this way the handling is really improved and there is more margin for mistake on the lever of
the joystick.
In this way it is comfortable to use the wheelchair in indoor environments.

OUTDOOR PROFILES

When this profile is activated most of the parameters of the wheelchair are at the maximum
value. For example the maximum speed and the acceleration are not limited.
In this way it is comfortable to use the wheelchair in outdoor environments.

However remember that the wheelchair EVO3 was designed for use mostly in indoor environments.

«
...
17
18
19
20
21
...
»

Содержание EVO3






























































































Отзывы:

Нет отзывов