Neatech EVO3, Руководство по обслуживанию, Страница: 14 / 93

www.neatech.it
14
2.6 ADJUSTMENTS
EVO 3 wheelchair has the possibility of many adjustments to best suit the specific user.
To perform these adjustments they are required a 4 mm allen wrench, a 5 mm allen wrench and
a 8 mm open-end wrench.
These adjustments can be made by the vendor or by an assistant of the user.
2.6.1 Armrests
The available adjustment are in height and angle; these need to be made on the same order as
they are presented.
For the armrest height loosen the four bolts shown in Figure 5 and adjust the height with the
single bolt located upon the support shown in Figure 6. For this operation use the 5 mm allen
wrench
Figure 5
Figure 6
For the armrest angle, you can decide to adjust the horizontal and vertical angle.