37 / 45
Installation and Maintenance
| 37
11
Installation and Maintenance
11.1
VESA Mounting
This monitor is compliant with the VESA Mounting Interface Standard, with 100 x 100 mm and 200 x 100 mm
MIS hole mount patterns, suitable for stand or boom mounting.
WARNING!
Mounting bracket screws must be securely tightened. Failure to properly secure the mount-
ing bracket to the display could be hazardous.
11.2
Cable Cover Installation
1. Connect power, control, and video cables before installing the cable cover.
2. Align the cable cover to the cable well recess on the back of the display.
3. Position cables under the cut-out, and slide the cover forward into the recess until tabs on the bottom
edge click into place.
11.3
Cleaning Instructions
Prior to cleaning, the monitor must be turned OFF and disconnected from the power source.
Clean the front glass and enclosure with a lint-free cloth lightly dampened with distilled water, or an ammo-
niabased glass cleaner, or any of the following disinfectants:
Ethanol (80%)
Isopropyl Alcohol
White Vinegar (distilled, 5% acidity)
WARNING!
Do not allow liquids to enter the interior of the monitor, as severe damage to the unit can
result. Do not use solvents, abrasive detergents, or chemical cleaning cloths.