NDS RADIANCE ULTRA 32 4K ZEROWIRE DUO, Инструкция по эксплуатации

Страница: 31 / 48

29 / 45
Set up and Installation | 29
7.3 Setting up and linking the displays
Setting up the transmitting (primary) display
The primary display will show and transmit the video from a video source to a linked secondary display.
1. Connect a video source to one of the three ZeroWire capable inputs: Tx 12G-SDI-IN ZW, Tx DISPLAYPORT
ZW or Tx HDMI ZW (see Connector Panel [ } 21]).
2. Open the INPUT tab (see Input Menu [ } 19]) on the primary display.
3. Select either Tx 12G-SDI ZW, Tx DisplayPort ZW or Tx HDMI ZW by selecting one of the three Tx ZW op-
tions.
4. Open the SETUP tab (see Setup Menu [
}
18]).
5. Ensure ZeroWire Power is set to On . If not, set ZeroWire Power to On .
Setting up the secondary (receiving) display
The secondary display will receive the video transmitted from the primary display wirelessly.
1. Open the INPUT tab (see Input Menu [ } 19]) on the secondary display.
2. Select ZW Receiver .
3. Open the SETUP tab (see Setup Menu [ } 18]).
4. Ensure ZeroWire Power is set to On . If not, set ZeroWire Power to On .