31 / 45
Set up and Installation
| 31
Stage 2: Establishing Link
The blinking speed of the respective indicator will increase when establishing a link.
Stage 3: Wireless Linked
The respective indicator will stop blinking and light up in blue when a link has been established.
If after 10 seconds no message is displayed, the link is successful and has sufficient connection quality. If the
link has less than 65 % connection quality, an icon will appear indicating the quality of the wireless link.
If a link cannot be established or verified within 60 seconds, the
No Receiver Found
or
No Transmitter
Found
status message will be presented on the primary and secondary display respectively.
If the linked displays lose connection
Signal Lost
will be presented on both displays.
NOTE!
If the linking process failed repeat the linking process.
NOTE!
Link Quality Indication
Link Quality Indication may not be fully synchronized between displays for intermittent
and brief perturbations of the wireless connection.
