NCR 7452, Руководство пользователя

Страница: 214 / 261

4-50 Chapter 4: Setup
Clearing a Password
To change a password, refer to Setting Passwords earlier in this chapter .
Do not clear a password without obtaining permission from the
responsible supervisor.
If the supervisor password is lost, it can be cleared by shorting the
appropriate pins on the Motherboard. For the location of these pins,
refer to the 7452 Workstation Hardware Service Guide.
If the user password is lost and the supervisor is not available, then the
above procedure can be used to clear the supervisor password. Then
new supervisor and user passwords can be defined.