NAVMAN
8120/8084
Installation and Operation Manual
98
20-7 Installation: NAVMAN petrol/gasoline sensors
Fit the optional petrol/gasoline fuel kit
following the instructions supplied with the kit.
Note:
SmartCraft engines have fuel flow sensors,
therefore NAVMAN fuel sensors are not
required as well.
For dual engines, fit two kits.
Wire the Instrument for auto power (see
section 20-4).
20-8 Installation: NAVMAN diesel sensors
Fit the optional diesel fuel kit following the
instructions supplied with the kit. Note:
SmartCraft engines have fuel flow sensors,
therefore NAVMAN diesel sensors are not
required as well.
For dual engines, fit two kits. Wire the two
diesel flow sensor cables in parallel.
Normally, power the diesel sensors
from the boat ignition switch. Then the
Instrument does not need to be wired for
auto power (see section 18-4).
During setup:
a) set
NavBus
to (see section 19-12)
b) set the fuel data (see section 19-6)
Fuel sensor cable
Diesel sensor cable
White
White
During setup:
a) set the fuel data (see section 19-6)
Connect the transducer to the blue Instrument
connector; tighten the locking collar.
During setup
a) set
Sonar
to (see section 19-1)
b) set up the sonar options (see section 19-3)
Sonar cable
Blue
20-6 Installation: Sonar transducer
!
WARNING
Do not install plastic through hull
transducers in solid wooden hulls.
Leakage through the hull may result.
Do not install bronze transducers in metal
hulls. This will cause electrolytic corrosion
that may result in damage to the hull or
transducer.
Содержание 8084
Страница 1: ...w w w n a v m a n c o m Installation and Operation Manual Navman 8120 8084...
Страница 103: ...NAVMAN 8120 8084 Installation and Operation Manual 103 NAVMAN 8120 Physical Dimensions NAVMAN 8084...
Страница 114: ......
Страница 116: ...Lon 174 44 535 E Lat 36 48 404 S Made in New Zealand MN000444C G Navman 8120 8084 Installation and Operation Manual...