Navman 8084, Инструкция по установке и эксплуатации

Страница: 83 / 116

NAVMAN 8120/8084 Installation and Operation Manual 83
Diesel sensors
If the boat has more than one diesel engine
and has NAVMAN diesel sensors, set up the
diesel sensors:
1 In the fuel setup menu, select
Diesel
sensors
. The display shows fuel flow
and RPM for the engines.
2 Identify which line has data for a known
engine; for example vary the speed of one
engine or have one engine running and
the other(s) stopped.
3 Press or to select the line with data
for the known engine. Press
ENTER
, select
the known engine’s name and press
ENTER
.
4 Repeat the above step for the other
engines in turn.
5 Press
ESC
.
Fuel consumption curve
See section 13-6.
Speed source
If both water speed and ground speed
are available, select which to use for fuel
calculations (see section 10-5-1).
Max fuel flow
The maximum fuel flow from a fuel tank to be
displayed on an analog fuel flow gauge (see
section 8)
Max RPM
The maximum engine RPM to be displayed
on an analog RPM gauge. Required only if
NAVMAN diesel flow sensors are installed.
Enter the maximum RPM you know you
can achieve for the engine rather than the
maker’s value.
19-7 Setup > Track
Press
MENU
twice, then select
Track
:
Tracking records and displays the boat’s
course on the chart (see section 3-5). Five
different tracks can be recorded: track 1 has
up to 2000 points and tracks 2, 3, 4 and 5
have up to 500 points each.
Record
Off
: The Instrument stops recording a
track.
1 to 5
(select a track number): The
Instrument starts recording the boat’s
course into the selected track.
Display
Off
: No track is shown on the chart.
1 to 5
(select a track number): The
selected track is shown on the chart.