Navman 8084, Инструкция по установке и эксплуатации

Страница: 15 / 116

NAVMAN 8120/8084 Installation and Operation Manual 15
The MOB feature saves the boat’s position
and then navigates back to this point.
2-4 Man overboard (MOB)
If the NMEA output (autopilot) is on , the
Instrument asks if the autopilot is active.
Select:
No : Use the Instrument to manually
navigate to the destination MOB
waypoint (see sections 3-1-1 and 3-1-2).
Yes : The Instrument asks if the boat is to
go to the MOB waypoint.
Select:
Yes: to immediately start navigating to the
MOB waypoint.
2-5 Alarms
When the Instrument detects an alarm
condition, it displays a warning message on
the display, the internal beeper sounds and
any external beepers or lights operate.
Press
ESC
to clear the alarm. The alarm will
sound again if the alarm condition occurs
again.
The Instrument has user settable alarms (see
section 19-10).
1 Press
The Instrument stores the boat’s position
as a waypoint called MOB.
2 The Instrument changes to the chart
window, with the MOB waypoint at the
centre of the chart.
The chart zooms in for accurate
navigation. If the chart can not show
the required small scale, the Instrument
changes to plotter mode (a white window
with crosshatching and no chart details,
see section 19-2).
3 The Instrument sets the MOB waypoint to
be the destination to navigate to.
If the NMEA output (autopilot) is off
(see section 19-12) use the Instrument to
manually navigate to the destination MOB
waypoint (see sections 3-1-1 and 3-1-2).
No: disengage the autopilot; then use
the Instrument to manually navigate
to the destination MOB waypoint (see
sections 3-1-1 and 3-1-2).
To cancel MOB or set another MOB
1 Press again to display a menu.
2 Select an option from the menu.
Tip : The MOB waypoint remains on the
chart after the MOB has been cancelled. To
delete the MOB waypoint, see section 6-2-5.
!
WARNING
MOB will not work if the Instrument does
not have a GPS fix.
!
WARNING
This might result in a sudden and
dangerous turn.