NAVMAN
8120/8084
Installation and Operation Manual
25
ii Select other items or press
ESC
to
return to the chart.
To see stored information about nearby
symbols press
MENU
and select
Chart info
.
Then follow step 3 above.
3-2-5 Finding a chart symbol
To find and display a chart symbol:
1 Press
MENU
and select
Find
.
2 Select the type of symbol: Waypoints,
Routes, Ports by name, Ports & services, or
Tide stations.
3 For Ports & services: select the type of
service to find.
For Ports by name: press , , or to
enter a name or letters contained in the
port name, then press
ENTER
.
4 A list of items is displayed. If there are
more items than will fit on the window,
press or to page up and down.
For Ports by name: to search for a different
port name, press
ESC
. Change the name,
then press
ENTER
.
5 Select the item and press
ENTER
. The chart
window changes to show the item in the
middle of the window.
To see stored information about the item,
press
ENTER
(see section 3-2-4).
3-2-6 Perspective view
Perspective view shows the chart from an
angle instead of from straight above. To turn
perspective view on or off, press
MENU
and set
Perspective
to or .
3-2-7 Turn the radar overlay on or off
If you have a radar installed, you can overlay
the radar screen on your chart screen. This is
extremely useful because it can help you to:
• interpret the radar image by matching the
radar targets with charted objects
• quickly identify objects that are not on the
chart, such as other boats
The radar overlay is also very useful in
conditions of reduced visibility, at night, or in
busy or hazardous waters.
The range, rotation, mode, and centre
position of the radar are all adjusted
automatically to match your chart.
To turn the radar overlay on or off:
From the chart window, press
MENU
and set
Radar Overlay option to or .
An extra menu item will them be displayed to
control the radar and overlay.
3-3 Distance and bearing calculator
The distance and bearing calculator can plot
a course of one or several legs and show
the bearing and length of each leg, as well
as the total distance along the course. The
completed course can be converted into a
route.
To use the distance and bearing calculator:
1 Select the Chart window. Press
MENU
and
select
Distance
.
2 Move the cursor to the start of the first
leg. It does not matter if this point is a
waypoint or not. Press
ENTER
.
3 To add a leg to the course, move the
cursor to the end of the leg. It does not
matter if this point is a waypoint or not.
The window shows the bearing and length
of the leg, as well as the total distance
along the course. Press
ENTER
.
4 To remove the last leg from the course,
press
MENU
and select
Remove
.
5 Repeat the above two steps to enter the
whole course.
6 To save the new course as a route,
press
MENU
and select
Save
. This also
saves any new points on the course as
new waypoints, with default names. If
necessary, edit the route later (see section
6-2-2) and edit any new waypoints later
(see section 6-2-3).
7 Finally,
press
ESC
to return to the chart
window.
Содержание 8084
Страница 1: ...w w w n a v m a n c o m Installation and Operation Manual Navman 8120 8084...
Страница 103: ...NAVMAN 8120 8084 Installation and Operation Manual 103 NAVMAN 8120 Physical Dimensions NAVMAN 8084...
Страница 114: ......
Страница 116: ...Lon 174 44 535 E Lat 36 48 404 S Made in New Zealand MN000444C G Navman 8120 8084 Installation and Operation Manual...