Navionics Raychart 425, Руководство пользователя

Страница: 85 / 114

Chapter 5: Installation 5-3
Items Missing?
If any one (or more) of the above items is missing or damaged, please
contact your Raytheon dealer or our Product Support Department to
obtain replacement parts. Please note that missing or damaged items
cannot be replaced without proof of purchase.
Registering this Product
When you have checked that you have all of the listed components,
please take the time to complete the pre-paid warranty registration card.
This ensures that you receive prompt and expert attention should you
experience any difficulties with the product.
GPS Receiver Installation
The Raystar 120 GPS Receiver is designed to receive the signals emitted
from the satellites in a direct path. Ideally, the unit should be mounted
horizontally in a location that is open and clear of any masts, search
lights, or other structures that could block line-of-sight reception of
signals. The height of the GPS Receiver is not as important as it’s having
a clear view horizon to horizon for optimum signal reception. In fact, the
lower the unit can be mounted and have a clear view to satellites, the
better. The more stable the unit, the easier it is to track satellites lower to
the horizon.
The Raystar 120 can be mounted on a pole. Alternatively, you can use the
supplied surface mount kit.
When mounting the GPS Receiver flush to a deck surface, avoid areas
where the unit will be trodden upon or where it may present a tripping
hazard.
Panel Mount Kit* E35006
Trunnion Mount Kit E35005
Power Cable R38024
GPS Extension Cable* E35003
Owner’s Handbook 81172
Bridge Card 86055
* Optional Accessory.
Table 5-1:System Parts and Accessories (Continued)
Item Part #