Navionics Raychart 425, Руководство пользователя

Страница: 57 / 114

Chapter 3: Operation 3-31
The
RECEIVE WAYPOINTS
function adds waypoints and routes received
via NMEA to the Waypoint List and Route List.
Note: Where multiple waypoints have the same position, the last way-
point sent is the only one included in the Waypoint List.
➤
To send waypoints (and route lists):
1. From chart mode, press
ENTER
; the primary function bar is displayed
(Figure 3-46):
Figure 3-46: Primary Function Bar
2. Using trackpad left/right, select
WAYPOINTS (
Figure 3-47
)
.
Figure 3-47: Waypoint Function Bar
3. Select
WAYPOINT LIST
.
The Waypoint List is displayed, with its associated function bar
(Figure 3-48):
Figure 3-48: Waypoint List Function Bar
4. Initiate receiving of waypoints on the NMEA compatible equipment.
5. Select
WPT/ROUTE TRANSFER
.
The waypoint transfer functions are displayed (Figure 3-49):
Figure 3-49: Waypoint Functions
6. Select
SEND WAYPOINTS
and press
ENTER
; the text changes to
STOP SENDING
.
7. To stop waypoint transfer, press
ENTER
.