Navionics Raychart 425, Руководство пользователя

Страница: 45 / 114

Chapter 3: Operation 3-19
Join a Route
➤
To start following the current route from a selected waypoint:
1. Move the cursor over a route waypoint until the
WAYPOINT OPTIONS
function is displayed (Figure 3-29):
Figure 3-29: Route Options Function
2. Press
ENTER
and select
FOLLOW FROM HERE(
Figure 3-30
)
.
Figure 3-30: Waypoint Function
The vessel follows the route, using the selected waypoint as the target.
3. To return to chart mode, move the cursor away from the waypoint or
press
CLEAR
.
Advance to a Waypoint
When following a route it is possible to advance to the next waypoint,
even if the current target waypoint has not been reached.
➤
To advance to a waypoint:
1. Press the
GOTO
key to display the Goto/Follow functions
(Figure 3-31):
Figure 3-31: GOTO/Follow Functions
2. Select
WAYPOINT ADVANCE
. The current leg of the route is aban-
doned and the next waypoint becomes the target. The display is
updated to show the new route leg.
Restart Cross Track Error (XTE)
Reset XTE is useful if you find yourself off track and prefer to go directly
to your target, rather than get back onto the original track.
Whilst following a route, or going to a target point, you can restart the
XTE. This sets the XTE to zero and moves the origin to the vessel’s actual
position.
D4687_1
FOLLOW
FROM HERE
EDIT
WAYPOINT
REMOVE
WAYPOINT
MOVE
WAYPOINT
D4688_1
STOP
FOLLOW
RESTART
XTE
WAYPOINT
ADVANCE