13
The point "ROUTE Setting" is located in the basic settings.
Here you have to set the distance indicator for the response
to the route waypoints you set. Over a distance of 1000m
with four waypoints for example, the setting must be 200m
to display the changes of direction correctly. Otherwise, the
NL-125O will only show the one at 1000m and you may run
in the wrong direction.
5.2 Finishing of the Route
1. Press
the button to finish route management.
2.
Choose "YES" and the NL-125O ends active route
management. This will be indicated by a compass
with no needle.
6. Waypoints
6.1 Saving of Waypoints
z
In order to save a point of interest (POI) or the place you have parked your vehicle for example,
proceed as follows.
1. Press
the
button to select a waypoint icon. If
you do not like the one displayed, choose NO. You can
switch between YES and NO with the
key.
2.
By using the
key, you can switch from "Confirm"
to the designation (in this example 010) and the
picture for this waypoint (in this example the point
above the 010).
3.
Confirm with OK if you want to change the picture or
the designation. You can use the
key for browsing
within this selection. Always confirm this with OK.
4.
You have a total of 10 memory slots for waypoints.
Содержание NL-125O
Страница 1: ...5 ...
