User’s manual NAVIGON Primo
Troubleshooting
- 65 -
4. Tap
on
(Back).
The
N
AVIGATION
window is now open again.
I have accidentally activated demo mode.
If you have accidentally activated demo mode when you start the
navigation application for the first time, you can deactivate it again as
follows:
1. In
the
N
AVIGATION
window, tap on Options > Settings.
The
S
ETTINGS
window is opened.
2. Tap
on
Options > Factory Settings.
You will be prompted to confirm that you want the device reset to
the as-delivered state.
3. Tap on the Yes button.
The software is re-started and behaves as if started for the first time
after being purchased. (Refer to "Switching on the
NAVIGON Primo" on page 13)
Start the navigation software and set the Start in Demo Mode
setting to No. (Refer to "Starting the navigation application" on
page 19)
Note:
Use only accessories which are recommended by NAVIGON
expressly for the
NAVIGON Primo
. NAVIGON AG accepts no liability
for errors or damages resulting from the use of other accessories.
For suitable accessories go to
www.navigon.com
or your authorised
dealer.