User’s manual NAVIGON Primo
Operating the NAVIGON Primo
- 15 -
Switching off the navigation device
►
Press the
(
On/Off
) key and keep it pressed until the message
"Let go of the key to switch off the device." appears. (Approx.
6 seconds)
Note:
When you switch the navigation device to standby mode, the next
time it is switched on it will start very quickly and with the window which
was active when switched off. In standby mode the device still
consumes a small amount of energy however. Depending on how full
the battery is, it can become flat within a few days or a few weeks.
When you switch off the device, it consumes no energy. It can then take
several months for the battery to become flat. Switching the device on
again triggers a restart which can take some time (approx. 30 seconds).
Your settings and your saved destinations and routes will be retained.
3.1
Options
Some windows offer options that lead to more functions.
A description of all available options can be found in the chapter
"Options" on page 38.
4
Operating the NAVIGON Primo
4.1
Information
Various information symbols are located at the top of many windows.
GPS
The
GPS
symbol can show the following GPS reception status:
No GPS
(No symbol): The built-in GPS receiver is not operational.
Contact us if the problem persists. (Refer to "Questions about the
product" on page 7)
No Signal
: Data is being received from less than three satellites. The
position cannot be calculated.
GPS Ready
: Data is being received from at least 3 satellites. The
position can be calculated.
For details of the GPS status refer to chapter "GPS Status, saving the
current location" on page 54.