User’s manual NAVIGON Primo
- 36 -
Navigation
5.4.5 Loading
routes
1. Tap
on
Options > Saved Routes.
The
S
AVED
R
OUTES
list opens. It shows all the saved routes in
alphabetical order.
2. Tap on the route that you want to load.
3. Tap on Load Route.
The
R
OUTE
P
LANNING
window opens. The starting point and the
route points of the loaded route have been entered. For the route
calculation the starting point is replaced by the current position. You
will now be guided to the first route point.
5.4.6
Calculating and displaying routes
It is possible to calculate and display a planned route on the map even
without GPS reception in order to get an impression of the journey.
The
R
OUTE
P
LANNING
window is open. The starting point and at least
one route point have been entered.
►
Tap on Show Route.
The map opens in
Preview
mode.
The starting point and the route points are marked by flags. The
distance and the estimated trip time is given for each leg of the
route.
5.4.7 Simulating
routes
It is also possible simply to simulate navigation on a planned route.
Note:
GPS reception is not necessary for simulation.
If you have planned a multi-leg route, only the first leg will be simulated.
You have calculated and displayed a route.
1. Tap
on
Options > Simulation.
The route will be recalculated for simulation purposes.
2. Tap on the button of the route on which you want to simulate the
navigation.
Stopping simulation
You can stop simulation at any time.
►
Tap on
(Back).
The
R
OUTE
P
LANNING
window opens.