User’s manual NAVIGON Primo
- 12 -
Before you begin
Inserting the navigation device into the cradle
On the back of the
NAVIGON Primo
you will see a circle with two
recesses.
1. Hang the navigation device by the upper recess on the upper lug of
the cradle. (See illustration)
2. Then press it towards the cradle so that it latches in place.
Supplying power to the navigation device
Included in delivery of the
NAVIGON Primo
is a car charger cable with
which power can be supplied to the navigation device via the vehicle's
cigarette lighter.
►
Connect the car charger cable to the vehicle's cigarette lighter and
to the mini USB socket of the navigation device.
The LED on the bottom of the navigation device lights up orange during
charging.
As soon as the battery is fully charged, the LED lights up green.
Caution!
Connect the car charger cable only to cigarette lighters with
an operating voltage of 10-24V.
Note:
It takes approx. 3 hours to charge the device when the battery is
flat.
A fully charged battery enables up to 3 hours of use depending on the
device configuration.
2.4.2 Memory
card
A memory card is not required to operate the
NAVIGON Primo
because all the data needed for navigation are stored in the internal
memory of the device.