User’s manual NAVIGON Primo
Navigation
- 27 -
The map opens in
Preview
mode. The destination is indicated on
the map.
For detailed information on how to start navigation, please refer to
chapter "Route preview" on page 31. Please read on there.
Direct access to POIs
The direct access area contains 3 categories of POI. Destinations in
your vicinity that correspond to one of these categories can be viewed
here quickly and without further entry.
►
In the
N
AVIGATION
window tap on Options > Settings > General in
order to select which categories or sub-categories are to be
available for direct access.
Note:
The categories for the
Direct Access
function are the same as
those available for the
POI on Your Route
function. (Refer to "Map
options in Navigation mode" on page 46)
Note:
GPS reception must be good enough for determining your
position. Check the
(GPS Ready) symbol to see whether GPS
reception is good enough.
For more details refer to the chapter "Initialising the GPS receiver" on
page 19.
1. In
the
N
AVIGATION
window tap on New Destination.
The
N
EW
D
ESTINATION
menu opens.
In the Direct Access area you are shown the symbols of those POI
categories that are available by direct access.
2. Tap on the category from which you would like to select a POI.
A list opens. It contains the nearest POIs in the specified category,
sorted by distance.
3. Tap on the name of the destination in order to start navigation to it.
The map opens in
Preview
mode. The destination is indicated on
the map.
For detailed information on how to start navigation, please refer to
chapter "Route preview" on page 31. Please read on there.
5.2.5
Information about the destination
For many destinations that you specify there will be further information
available, stored in the navigation system's database.