Nautel NX400, Руководство по установке

Страница: 10 / 89

NX400 Installation Manual Preparing for installation
Page 1-2 Issue 1.0 2017-06-30
6. Unpack the crates in accordance with the instructions provided on the outside of the crates.
• For each crate, remove the panel labelled
open this side
. The panel is attached using
Philips head screws.
• Remove any visible packing material, including braces, from the crate's interior.
• Remove the remaining outer plywood shell by unscrewing the outer wood panels from
the pallet under the transmitter.
7. Review any assembly notes or instructions contained inside the transmitter crates. (For sites
requiring custom configurations, the instructions provided with the transmitter replace the
instructions provided here.)
8. Gather the parts and tools you will need for installation. For a list of required tools, see
“Parts and tools” on page 11-1 .
9. When you are ready to install the NX400 transmitter, follow the steps shown in Figure 1.2
on page 1-3 .
TIP When you have completed a task or step, put a check mark beside the step
number.
CAUTION:
FAILURE TO COMPLY WITH RECOMMENDATIONS MAY VOID YOUR MANUFACTURER’S
WARRANTY. FOR MORE INFORMATION, REVIEW YOUR WARRANTY DOCUMENTS.