Nautel GV3.5, Руководство по эксплуатации и техническому обслуживанию, Страница: 27 / 251

GV5/GV3.5 OPERATIONS & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
PAGE 3.2.10 VERSION 0.2 2014-07-23
Logging into the AUI
The transmitter’s AUI provides a means to restrict local and remote access to transmitter control
functions to authorized users only. Users can create accounts that can be pre-defined to set access
restriction from view-only (no control), full control (all permissions), custom (select permissions) and
administrative control.
Remote Access
To access the transmitter’s AUI remotely, perform the following steps:
1. Configure your network settings (see Network Setup, on page 3.2.138 ).
2. On your router or firewall software, open ports 3501 (3501 is factory default; use corresponding
other port if changed) and 80 and close (restrict access to) all other ports. If you are using RDS
data, open port 7005. If you are using SNMP, open ports 161 (Agent) or 162 (Traps).
3. When properly configured as noted above, the login menu (see Figure 3.2.5 on page 3.2.10 ) will
appear in your web browser when the IP address is accessed. Your IP address and any login
messages appear in a box at the top, beside the logo.
Figure 3.2.5: AUI Login Menu
IP address and login messages
shown for reference only