Nautel GV3.5, Руководство по эксплуатации и техническому обслуживанию, Страница: 155 / 251

GV5/GV3.5 OPERATIONS & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
PAGE 3.2.138 VERSION 0.2 2014-07-23
Figure 3.2.120: User Settings menu - Network Setup page shown
Network Setup
You can configure network settings using the AUI (see Network Setup - Using the AUI, on page 3.2.139 )
or the controller UI (see Network Setup - Using the Controller UI ). If you change a network setting on the
AUI, it will also be reflected on the controller UI, and vice versa.
NOTE:
Nautel recommends that the following network settings be entered/vetted by a qualified
Network Administrator. If parameters are changed and the AUI is reset, record the new values (or see
the local front panel UI) to ensure you can log in after changes have been made.
Determining DHCP Setting
One of the main decisions in configuring the network connection on your GV5/GV3.5 transmitter is
whether you set DHCP to
ON
or
OFF
. If you are connecting to a network, consult with a network
administrator before connecting the transmitter to your network to determine whether to enable (turn
ON
) or disable (turn
OFF
) the DHCP setting.
When DHCP is set to
ON
(default from factory), IP addresses are assigned automatically by the network
server. In order for this feature to function properly, you must have a network-viewable DHCP server on
your network.
If a DHCP server is not present, you (or your network administrator) must provide static addresses for IP,
netmask, gateway and nameservers (gateway and nameservers are optional). You must enter them
manually using the AUI or controller UI. In this case, DHCP should be set to
OFF
.