Nautel GV3.5, Руководство по эксплуатации и техническому обслуживанию, Страница: 168 / 251

GV5/GV3.5 OPERATIONS & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
VERSION 0.2 2014-07-23 PAGE 3.2.151
 Trap Receiver IP : Enter the IP address of the computer to which the SNMP agent will send
trap notifications. The computer must be running an SNMP application that is configured to
receive traps. The SNMP agent will send trap notifications to at most one receiver.
 Trap Receiver Port: Enter the UDP port where the SNMP agent will send traps. The default
setting is 162.
3. When complete press Apply or click Undo to restore the previous settings.
Figure 3.2.129: SNMP Configuration page - Traps tab shown
Traps Settings
A trap is an unsolicited message sent by an SNMP agent to an SNMP client when an alarm changes
state (turns on or off). The message is an SNMP packet that can be interpreted and displayed by an
SNMP client application. Using the
Traps
tab (see Figure 3.2.129 ), select your desired traps as follows:
1. Find the desired alarm(s) by selecting the appropriate
Device
type (Controller or Exciter) and
scrolling through the
Available Traps
list. Add or remove traps to and from the
Selected Traps
list
using the >> and << arrow buttons).
2. When complete press
Apply
to save or press
Cancel
to restore the previous setting.