Nautel GV3.5, Руководство по эксплуатации и техническому обслуживанию, Страница: 195 / 251

GV5/GV3.5 OPERATIONS & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
PAGE 3.2.178 VERSION 0.2 2014-07-23
Configure Output Logic - AUI
You can configure the active/inactive logic for each of the 16 digital outputs. Press the existing
Logic
bar to display the applicable drop-down menu options. Some digital output default examples:
If the selected channel is
RF On/Off
, the drop-down options are:

Output Low When RF On
. Logic ‘0’ (low) indicates the output is true (RF is on); Logic ‘1’ (high)
indicates the output is false (RF is off).

Output Low When RF Off
. Logic ‘0’ (low) indicates the output is true (RF is off); Logic ‘1’ (high)
indicates the output is false (RF is on).
If the selected channel is
Local/Remote
, the drop-down options are:

Output Low When Local
. Logic ‘0’ (low) indicates the output is true (Local); Logic ‘1’ (high)
indicates the output is false (Remote).

Output Low When Remote
. Logic ‘0’ (low) indicates the output is true (Remote); Logic ‘1’ (high)
indicates the output is false (Local).
If the selected channel is
Active Exciter
, the drop-down options are:

Output Low When A
. Logic ‘0’ (low) indicates the output is true (A); Logic ‘1’ (high) indicates the
output is false (B).

Output Low When B
. Logic ‘0’ (low) indicates the output is true (B); Logic ‘1’ (high) indicates the
output is false (A).
if the selected channel is
Auto Changeover Enabled
, the drop-down options are:

Output Low When Enabled
. Logic ‘0’ (low) indicates the output is true (Enabled); Logic ‘1’ (high)
indicates the output is false (Disabled).

Output Low When Disabled
. Logic ‘0’ (low) indicates the output is true (Disabled); Logic ‘1’
(high) indicates the output is false (Enabled).
if the selected channel is
Preset: Preset 1
, the drop-down options are:

Output Low When Active
. Logic ‘0’ (low) indicates the output is true (Active); Logic ‘1’ (high)
indicates the output is false (Inactive).

Output Low When Inactive
. Logic ‘0’ (low) indicates the output is true (Inactive); Logic ‘1’ (high)
indicates the output is false (Active).
Press
Apply
to activate changes. Press
Cancel
to cancel changes.