Nautel GV3.5, Руководство по эксплуатации и техническому обслуживанию, Страница: 197 / 251

GV5/GV3.5 OPERATIONS & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
PAGE 3.2.180 VERSION 0.2 2014-07-23
Figure 3.2.154: Remote Inputs Screens (Input 1 shown)
Use the up and down buttons to select the desired digital input (1 through 10) from the list. Each screen
shows the current digital input parameter (e.g., RF On/Off), as well as the polarity (e.g., Falling edge RF
On) and current state (e.g., high, low) of the corresponding input pin. Use the right-arrow button to
enter the
Selection/Polarity
screen for the selected input to allow editing of the selection or the
polarity. Press cancel (
X
) to return to the previous menu.
If you save a change to a digital input via the controller UI, it will also be displayed on the AUI page.
NOTE
: The selection and polarity options for digital inputs are the same as described in Select Input
Channel - AUI, on page 3.2.174 and Configure Input Control Logic - AUI, on page 3.2.175 .