Nautel GV3.5, Руководство по эксплуатации и техническому обслуживанию, Страница: 196 / 251

GV5/GV3.5 OPERATIONS & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
VERSION 0.2 2014-07-23 PAGE 3.2.179
Remote I/O Settings - using the Controller UI
To view the
Remote I/O
screen (see Figure 3.2.153 ) on the controller UI, select
Remote I/O
from the
Main Menu
.
Figure 3.2.153: Remote I/O screen
Use the up and down buttons to select
Remote Inputs
(see Digital Inputs - Controller UI ),
Remote
Outputs
(see Digital Outputs - Controller UI, on page 3.2.181 ) or
Analog Outputs
(see Monitoring
Analog Outputs, on page 3.2.182 ) to view or edit detail on the selected inputs or outputs.
Digital Inputs - Controller UI
Using the
Remote Inputs
screens (see Figure 3.2.154 on page 3.2.180 ), you can configure up to 10
digital inputs that allow you to remotely control various operational characteristics of the transmitter.
Unless otherwise noted, these inputs are only accepted by the transmitter if remote control is enabled.
That setting can only be made by a local user using the front panel AUI.
Nautel sets digital input defaults prior to shipping. See the GV5/GV3.5 Pre-installation Manual for
details.