Nautel Exporter Plus, Техническое руководство по эксплуатации, Страница: 57 / 186

Exporter Plus Technical Instruction Manual Remote interfacing
Issue 1.0 2020-05-05 Page 7-5
Remote configuration interface
The Exporter Plus provides a remote configuration feature. Configuration items can be viewed
and set via a command line interface right on the Exporter Plus unit command line. It is
possible to use standard SSH methods to log into the exporter unit and view and set items
using customer shell scripts. This section details the command line control over all supported
Exporter Plus configuration items.
items can be viewed as:
./epCU.x -v [item]
items can be set as:
./epCU.x -s [item] [value]
All of the items described in this section can also be controlled and/or monitored locally using
the Exporter Plus’s front panel. Refer to Section 8, “Operating” on page 8-1 for detailed
information on the following features described in this section:
• SoftwareVersion - view only - see page 7-7
• SerialNumber - view and set - see page 7-7
• OperatingMode - view only - see page 7-7
• StationNameShort, StationNameLong, StationNameUniversal - view and set - see page 7-7
• StationNameShortAppend - view and set - see page 7-7
• Slogan - view and set - see page 7-8
• MpsProgramType - view and set - see page 7-8
• CountryCode - view and set - see page 7-8
• FccId - view and set - see page 7-8
• PsdInterval - view and set - see page 7-8
• PsdReceivePort - view and set - see page 7-8
• SetDefaultSchedule - view and set - see page 7-8
• SIS Schedule - view and set - see page 7-9
• E2X Protocol - view and set - see page 7-10
• ExgineIp - view only - see page 7-10
• E2X Port - view and set - see page 7-10
• TimeZoneOffset - view and set - see page 7-11
• DstTransmitSchedule - view and set - see page 7-11
• DstSchedule - view and set - see page 7-11
• DstObserved - view and set - see page 7-11
• DstInEffect - view and set - see page 7-11
Notes: All item names are case sensitive. Bounds checking is enforced, so the caller should check the
response to ensure the parameter was set as expected. Commands are only supported starting in
software version 1.8. Strings with spaces can be enclosed in quotes "..."