manualshive.com logo in svg

Nautel Exporter Plus, Техническое руководство по эксплуатации, Страница: 161 / 186

Поделиться
Скачать
Nautel Exporter Plus Скачать руководство пользователя страница 161

Exporter Plus Technical Instruction Manual

Operating

Issue 1.0  2020-05-05

Page 8-91

Adjust LCD contrast

When you select 

LCD Contrast

 from the 

LCD SETTINGS

 menu (see 

Figure 8.175

), you can change 

the contrast level of the LCD display.

Figure 8.175: LCD Contrast Screen

The current contrast value is displayed on the top line.

The up and down buttons provide a fine adjust, changing the contrast by a value of 1. The left 

and right buttons provide a coarse adjust, changing the contrast by a value of 15. Use the 

approriate up/down or left/right buttons to change the contrast value as desired. The actual 

display contrast will change as you edit the value.

Press the checkmark to accept the change or press 

X

 to cancel.

Adjust normal backlight brightness

When you select 

Backlight Normal

 from the 

LCD SETTINGS

 menu (see 

Figure 8.176

), you can 

change the brightness level of the LCD display’s backlight during normal use.

Figure 8.176: Backlight Normal Screen

The current normal backlight value is displayed on the top line.

The up and down buttons provide a fine adjust, changing the backlight brightness by a value of 

1. The left and right buttons provide a coarse adjust, changing the backlight brightness by a 

value of 8. Use the approriate up/down or left/right buttons to change the backlight value as 

desired. The actual backlight brightness will change as you edit the value.

Press the checkmark to accept the change or press 

X

 to cancel.

Содержание Exporter Plus



























































































































































































Отзывы:

Нет отзывов