EMU40EX™
User and Service Manual
50
The data transmitted through the wireless connection is used by the
NeuroWorks
software to present a passive visualization of
the EEG signals. It is not possible to perform any action on the signals presented by the software (passive signal representation).
The data sent over the wireless connection is not stored.
Upon reconnection, any data stored in the Breakout Box is transferred to the computer via the Base Unit and merged into the
recorded study (see below).
Physical Reconnection Mode with Wireless Option
Testing the EMU40EX Amplifier
The
EMU40EX
amplifier is fully assembled, tested, and calibrated before being shipped to you. However, the following sections
describe some tests you can perform to verify the performance of the
EMU40EX
amplifier.
Calibration and Verification
There is no need to calibrate the software or the
EMU40EX
amplifier. All calibration is done at the factory before the system is
shipped. To verify that the
EMU40EX
amplifier is correctly calibrated, perform the following procedure:
Содержание Xltek EMU40EX
Страница 1: ...EMU40EX User and Service Manual...
