natus Xltek EMU40EX, Руководство пользователя и обслуживания

Страница: 16 / 63

EMU40EX™ User and Service Manual
16
Patient Environment Warnings and Cautions
NOTE:
The patient environment is defined as the area within 1.5 meters of the patient laterally and within 2.5 meters of the
floor in the area occupied by the patient.
Do NOT operate the system in the presence of flammable anesthetics.
Check areas of use to avoid using the system in the presence of flammable gases.
Natus systems are not AP or APG rated. DO NOT USE a Natus system in the presence of a flammable anesthetic
mixture with air, oxygen, or nitrous oxide.
Connect all patient electrodes to fully electrically isolated devices only. Connecting patient electrodes to any other
device or external outlet may result in personal injury.
If a computer is located in the patient environment and is connected to a network, a network isolator MUST be
used.
Do NOT touch any EMU40EX system accessible metal parts and the patient simultaneously.
Do NOT touch any earth-grounded components of the EMU40EX system and the patient simultaneously.
Connection of a patient to high-frequency surgical equipment and to electroencephalography equipment
simultaneously may result in burns at the site of bio-potential input electrodes and possible damage to the
biological amplifiers. Please consult the user documentation of the surgical equipment for instruction as to its
proper use.
If a video camera is present in the patient environment, it should be connected via Ethernet directly to the
computer, and not to a network.
Do NOT position Medical Electrical equipment in such a way as to make it difficult to operate the disconnection
device.
No parts of the Medical Electrical equipment shall be serviced or maintained while in use with a patient.
Patient connections are NOT intended for direct cardiac contact.
Do not use EMU40EX in the vicinity of MRI or CT systems.
Do not allow loose electrodes to contact metal parts.
The pouch and belt or lanyard system must be worn over top of the patient’s clothes or hospital garment.
WARNING
Be sure to take the appropriate Electrostatic Discharge (ESD) precautions. Disconnect the cables before moving,
cabling, or performing any set up procedures.