8
ICS Aircal
Getting started
Locate the bag that shipped with the cradle that contains three screws and an Allen key.
With the side chosen to hold the cradle facing the ceiling and the bottom of the unit facing you, lay the ICS Aircal
device on its side.
Locate the bracket mounting holes.
Attach the bracket to the unit using the Allen key to tighten the screws.
Hold the cradle with the end that holds the bottom of the delivery head facing the front of the unit. Slide the
cradle onto the bracket in the horizontal position.
For units placed at the edge of the table, tilt the bracket forward until it stops.
Ensure that the mounting hole on the bracket aligns with the mounting hole of the cradle. Attach the cradle to
the bracket using the Allen key to tighten the screw.
Store the Allen key with the syringe kit. You will need it when filling the water reservoir.
2.2.3
Understanding the ICS Aircal Back Panel
The USB port
allows for firmware upgrades. Refer to
Firmware procedures
