National Instruments PXIe-5164, Руководство пользователя

Страница: 49 / 52

splitter output 1 and the signal generator is connected to the input port of the
power splitter.
The following figure illustrates the hardware setup.
Figure 8. 1 M
Ω
Bandwidth Verification Cabling Diagram
7
6
9
8
PXIe-5164
400 MHz Oscilloscope
ACCESS ACTIVE
CH 0
CAT II TO
50 Ω : 5 V Peak MAX
1 M Ω : 250 V Peak MAX
CH 1
250 V RMS
MAX INPUT:
+5 V MAX
CLK
IN
PFI 0
AUX 0
2
1
3
4
5
3
1. Power Sensor
2. BNC (f)-to-N (f) Adapter
3. SMA (m)-to-BNC (m) Adapter
4. Power Splitter
5.
50 Ω
SMA Feed-Thru Terminator
6. PXIe-5164
7. SMA (m)-to-SMA (m) Cable
8. SMA (f)-to-N (m) Adapter
9. Signal Generator
PXIe-5164 Calibration Procedure | © National Instruments | 49