![background image](http://html.mh-extra.com/html/national-instruments/pxie-3610/pxie-3610_getting-started-manual_3481823045.webp)
1.
Connect the DIGITAL I/O connector of the PXIe-3620 front panel to the DIO adapter
module using an EPLSP cable.
2.
Connect the DIO adapter module to the DIO 1 connector
3
of the mmRH-3602/3603 back
panel using an HDMI(m)-to-mini-HDMI(m) cable.
3.
Connect the RX LO1 connector of the PXIe-3620 front panel to the LO IN RX connector
of the mmRH-3602/3603 back panel using an SMA(m)-to-SMA(m) cable.
4.
Connect the RX IF IN connector of the PXIe-3620 front panel to the IF OUT connector
of the mmRH-3602/3603 back panel using an SMA(m)-to-SMA(m) cable.
5.
Connect the TX LO1 connector of the PXIe-3620 front panel to the LO IN TX connector
of the mmRH-3602/3603 back panel using an SMA(m)-to-SMA(m) cable.
6.
Connect the TX IF OUT connector of the PXIe-3620 front panel to the IF IN connector of
the mmRH-3602/3603 back panel using an SMA(m)-to-SMA(m) cable.
3
You may connect the DIO adapter module to the DIO 0 connector instead of the DIO 1 connector.
The choice of connector does not affect results.
mmWave Transceiver System Getting Started Guide
|
© National Instruments
|
45