![background image](http://html.mh-extra.com/html/national-instruments/pxie-3610/pxie-3610_getting-started-manual_3481823007.webp)
You can simultaneously connect different models of mmWave radio heads to the mmWave
Transceiver System. However, connecting models with different IF frequency ranges, such as
the mmRH-3642 and the mmRH-3647, may cause a non-ideal IF frequency to be used.
Related Information
Refer to the mmWave Transceiver System Specifications on ni.com for IF frequency ranges by
model.
Installing the Software
You must be an Administrator to install NI software on your computer.
1.
Install an ADE, such as LabVIEW.
2.
Install NI LabVIEW FPGA Module.
3.
(Recommended) Install the latest service pack for LabVIEW and any LabVIEW modules
you are using.
4.
Visit
ni.com/info
and enter the Info Code
mmwavedriver
to access the driver download
page for the latest NI-mmWave software.
5.
Download the NI-mmWave driver software.
6.
Run
setup.exe
.
7.
Follow the instructions in the installation prompts.
Note
Windows users may see access and security messages during
installation. Accept the prompts to complete the installation.
8.
When the installer completes, select
Restart
in the dialog box that prompts you to restart,
shut down, or restart later.
Related Information
Programming the mmWave Transceiver System
on page 57
Assembling mmWave Radio Head Tripods
(mmRH-3647/3657)
Complete the following steps to assemble the mmWave radio head tripods if your
configuration includes mmWave radio heads and tripod stability is desired.
1.
Install four 3/4 in. screws as shown in the following figure. Do not tighten.
mmWave Transceiver System Getting Started Guide
|
© National Instruments
|
7