![background image](http://html.mh-extra.com/html/national-instruments/pxie-3610/pxie-3610_getting-started-manual_3481823042.webp)
3.
Connect all mmWave radio heads to power.
Related Information
Interconnecting the Unidirectional MIMO (Baseband and IF) Modules
on page 23
Interconnecting the Unidirectional SISO (Baseband and IF) Modules
on page 15
Connecting mmRH-3647/3657 Radio Heads to a Unidirectional System
Complete the following steps to connect mmRH-3647/3657 radio heads to a unidirectional
mmWave Transceiver System.
Note
Connect the modules of the mmWave Transceiver System for standard use
before connecting mmRH-3647/3657 radio heads.
1.
Connect the RX chassis to the mmRH-3657.
a)
Connect the DIGITAL I/O connector of the PXIe-3620 front panel in the RX chassis
to the CONTROL connector of the mmRH-3657 back panel using an EPLSP cable.
b)
Connect the RX LO1 connector of the PXIe-3620 front panel in the RX chassis to
the LO IN connector of the mmRH-3657 back panel using an SMA(m)-to-SMA(m)
cable.
c)
Connect the RX IF IN connector of the PXIe-3620 front panel in the RX chassis to
the IF OUT connector of the mmRH-3657 back panel using an SMA(m)-to-SMA(m)
cable.
42
|
ni.com
|
mmWave Transceiver System Getting Started Guide