2.4GHz WIRELESS SWITCHER RECEIVER
ITEM NO.: 15-2400SR
■
PANEL DIAGRAM:
1.
▼
DOWN KEY: Diminish channel or scan time.
2.
▲
UP KEY: Add channel or scan time.
3. SCAN KEY: Cannel fix or switch.
4. ARM LED: LED ON is arm state, led off is disarm state.
5. MUTE LED: LED ON audio is mute state.
6. LED 1, 2, 3, 4: Channel display and switch time.
7. MUTE/ BYPASS KEY:
A. Control audio mute state or not on normal state.
B. Channel bypass or not on setting state.
8. ARM/ DISARM KEY: Set arm state or not.
9. MODE
KEY
A. CHANNEL SETTING
(1) PRESS
MODE key, one of the led 1, 2, 3, 4 will be flash.
(2) Press
▲
key or
▼
key to select channel
(3) When LED 1 flash, press MUTE/ BYPASS key to set channel 1 on or off, when
LED 2 flash, press MUTE/ BYPASS key to set channel 2 on or off…
(4) Press
MODE
key, come back normal state.
B. Switch time adjusting
(1) Press MODE key until all of the LED 1, 2, 3, 4 flash.
(2) Press
▲
key or
▼
key to adjust time.
(3) When LED 1 flashes, switch time is 2 sec; LED 1, 2 flash, switch time is 4 sec,
LED 1, 2, 3 flash, switch time is 6 sec, LED 1, 2, 3, 4 flash, switch time is 8 sec.
LED 1: 2 SEC, LED 1, 2: 4 SEC, LED 1, 2, 3: 6 SEC, LED 1, 2, 3, 4: 8 SEC
(4) Press MODE key, come back normal state.
*CAUTION FOR OPERATION
1. First, switcher receiver set switch state, then the unit set arm state, when the
system have two or more camera.
2. When the unit into arm state, press any key will not be operated. The unit be
triggered, will fix the channel, and has alarm sound, press ARM/ DISARM key can
SCAN
MUTE/BYPASS
ARM/DISARM
1
2
3
4
MODE
R
ARM
MUTE
