©
National Instruments Corporation
I-1
Index
Numbers
+5V signal (table), 4-3
8-bit ADC and LUT, 3-3
A
acquisition and region-of-interest control, 3-4
acquisition modes, 3-9
acquisition window
controlling, 3-6
programming video parameters, 3-7
active line region, 3-6
active pixel region, 3-6
A/D conversion specifications, A-2
ADC, 8-bit, 3-3
antichrominance filter, 3-2
aspect ratio. See pixel aspect ratio.
B
BNC connector
avoiding VIDEO0 connection with 25-pin
DSUB connector (note), 4-1
pin assignments (figure), 4-1
signal connections, 4-1
VIDEO0 input, 2-6
board configuration. See configuration.
C
cables
custom cable specifications, B-1
optional equipment, 2-2
required cables, 2-1
CompactPCI specifications, 1-2
composite synchronization. See CSYNC.
configuration, 2-4 to 2-8. See also installation.
board configuration NVRAM, 3-5
external CLK and synchronization input
mode, 2-7
parts locator diagram
PCI-1408, 2-5
PXI-1408, 2-6
setting up IMAQ system, 2-2 to 2-3
Switch S1, 2-8
VIDEO0 input mode, 2-6 to 2-7
CSYNC
acquisition window control, 3-6
CSYNC mux, 3-3
external acquisition mode, 3-9
CSYNCIN± signal (table), 4-3
CSYNCOUT signal (table), 4-3
custom cable specifications, B-1
D
delayed video acquisition, 3-5
DIFF input mode
external CLK and synchronization input
mode, 2-7
VIDEO0 input, 2-6 to 2-7
DMA controllers, 3-4
DSUB port. See I/O connector.
E
environment specifications, A-4
equipment, optional, 2-2
external CLK and synchronization input
mode, 2-7
external connection specifications, A-2
external lock mode
description, 3-9
