Glossary
©
National Instruments Corporation
G-11
RSE
Referenced single-ended. All measurements are made with respect to a
common reference measurement system or a ground. Also called a
grounded measurement system.
RTSI bus
Real-Time System Integration Bus. The National Instruments timing bus
that connects IMAQ and DAQ boards directly, by means of connectors on
top of the boards, for precise synchronization of functions.
S
s
Seconds.
saturation
The amount of white added to a pure color. Saturation relates to the richness
of a color. A saturation of zero corresponds to a pure color with no white
added. Pink is a red with low saturation.
scaling down circuitry
Circuitry that scales down the resolution of a video signal.
scatter-gather DMA
A type of DMA that allows the DMA controller to reconfigure on-the-fly.
SRAM
Static RAM.
StillColor
A post-processing algorithm that allows the acquisition of high-quality
color images generated either by an RGB or composite (NTSC or PAL)
camera using a monochrome video acquisition board.
sync
Tells the display where to put a video picture. The horizontal sync indicates
the picture’s left-to-right placement and the vertical sync indicates
top-to-bottom placement.
syntax
The set of rules to which statements must conform in a particular
programming language.
system RAM
RAM installed on a personal computer and used by the operating system,
as contrasted with onboard RAM.
T
transfer rate
The rate, measured in bytes/s, at which data is moved from source to
destination after software initialization and set up operations. The
maximum rate at which the hardware can operate.
TRIG
Trigger signal.
