English
13
2 Safety Instructions for Saws
with Linear Reciprocating Motion
–
During activities where the cutting tool may touch hidden
cabling or its own lead, the power tool must be held by the
insulated gripping surfaces.
The cutting tool coming into
contact with a live conductor may cause metal parts of the
power tool to become live as well and cause injury by electric
current to the user.
– Use clamps or other practical method of securing and
propping up the workpiece on a stable base.
Holding the
workpiece by hand or propped up against the body leads to
its instability and can cause the user to lose control of the tool.
3 Information about noise level and
vibrations
The values have been measured in conformity with EN 62841.
EPO 150
Acoustic pressure level L
pA
= 82 dB (A).
Acoustic power level L
wA
= 93 dB (A).
In accuracy of measurements K = 3.0 dB (A).
ATTENTION!
Noise is generated during work!
Use ear protection!
The weighted value of vibrations affecting hands and arms
a
h
= 4,72 m.s
‑2
.
In accuracy of measurements K = 1.5 m.s
‑2
.
The emission values specified (vibration, noise) were measured in
accordance with the test conditions stipulated in EN 62841 and are
intended for machine comparisons. They are also used for making
preliminary estimates regarding vibration and noise loads during
operation.
The emission values specified refer to the main applications for
which the power tool is used. If the electric power tool is used for
other applications, with other tools or is not maintained sufficient‑
ly prior to operation, however, the vibration and noise load may be
higher when the tool is used.
Take into account any machine idling times and downtimes to esti‑
mate these values more accurately for a specified time period. This
may significantly reduce the load during the machine operating
period.
4 Technical Specification
Model
EPO 150
Voltage (V)
230
Mains frequency (Hz)
50–60
Power input (W)
800
Stroke rate (min
‑1
)
0–2 500
Stroke length (mm)
22
Maximum depth of cut (mm)
aluminium
15
iron
6
wood
150
Weight according to EPTA 09/2014 (kg)
2.84
Class of protection
II /
5 Machine Description
[2].....Switch lock
[3].....Support
[4].....Support arresting screws
[5].....Clamping ring
[6].....Clamping jaws
[7].....Saw blade*
[8].....Vents
[9].....Adjustable main handle
[10] ..Release button
[11] ..Hex key
*) Some accessories displayed or described here may not be
included in the delivery.
6 Double insulation
To ensure maximum safety of the user, our tools are designed and
built to satisfy applicable European standards (EN standards). Tools
with double insulation are marked by the international symbol of
a double square. These tools must not be grounded and a two‑wire
cable is sufficient to supply them with power. Tools are shielded in
accordance with EN 55014.
7 Use
The machine is designed for cutting and making cut‑outs in wood,
plastic, steel, non‑ferrous metals and aluminium. It is suited for
straight cuts. To carry out the operations described below, use saw
blades recommended by the manufacturer.
The user bears full responsibility for the consequences of using the
tool for purposes other than the above.
8 Mounting and Removing a Saw
Blade
ATTENTION!
Risk of injury from electric current.
Unplug the machine from the power socket before
making any adjustments!
Before you mount the saw blade [7], clean the clamping jaws [6]
and clamping ring [5], as well as the clamping surfaces on the saw
blade [7]. Rotate the clamping ring [5] upwards using the lever and
insert the saw blade [7] between the clamping jaws [6]. Let go of
the clamping ring’s lever.
ATTENTION!
Pull on the saw blade [7] to check that it
is securely fastened.
To remove the saw blade [7] rotate the clamping ring [5] upwards
using the lever and remove the saw blade [7] from the clamping
jaws [6]. Let go of the clamping ring’s lever.
Содержание EPO 150
Страница 3: ...3 3 6 5 10 9 7 3 6 5 9 10 1 2 8 4 11...
