manualshive.com logo in svg

NARDA PMM 7010 Series, Руководство пользователя

Поделиться
Скачать
NARDA PMM 7010 Series Скачать руководство пользователя страница 46

 

 

6-4 

PMM 9010-RMA Rack Mount Adapter

 

 

 

6.7 Rack Requirements 

The rack must be of the following type: 
 
- Standard 19 inch (483 mm) with mounting rails that conform to English 
universal hole spacing per section 1 of ANSI/EIA-310-D-1992. 
 
- The minimum vertical rack space per chassis must be 3U (rack units), 
equal to 3 inches (132,5 cm). 
 

6.8 Required Equipment 

 

 

Before you begin the installation, ensure that you have the following items: 
 
- Crosshead screwdriver (not provided) 
 

- Flat-blade screwdriver or rack-insertion tool 

(not provided) 

 
- Tape measure and level (not provided) 
 
- Rack Mount kit (provided) 
 

6.9 Moving chassis 
 
 
 
 

 

 

When lifting the chassis, be aware of its weight, and follow these 
guidelines: 
 
- Disconnect all power and external cables before lifting the chassis. 
 
- Remove all instruments from the chassis before lifting. 
 
- 

Make sure that the milled knob well locking. 

 
- Using the two handles, lift the PMM 9010-RMA slowly keeping your back 
straight. Lift with your legs, not with your back. Bend at the knees, not at 
the waist. 
 

Содержание PMM 7010 Series













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды