NARDA PMM 7010 Series, Руководство пользователя

Страница: 18 / 76

2-2 Installation
2.5.2 Indication of the
Power status
with LINE led
When the wall universal adapter is connected to the PMM 7010 and the
power is switched ON the LINE led lights up.
After just a short time since the power has been switched on, the PMM 7010
is ready for use.
2.6 Environment The operating environment of the receiver is specified to be within the
following limits:
•
Temperature
•
Humidity
• Altitude
-5 °C to +45 °C
< 90% relative
4000 meters
The instrument should be stored and shipped in a clean, dry environment
which is specified to be within the following limitations:
•
Temperature
•
Humidity
• Altitude
-40 °C to + 50 °C
< 95% relative
15.000 meters
2.7 Return for Service If the instrument should be returned to NARDA for service, please complete
the service questionnaire enclosed with the Operating Manual and attach it
to the instrument.
To minimize the repair time, be as specific as possible when describing the
failure. If the failure only occurs under certain conditions, explain how to
duplicate the failure.
If possible, reusing of the original packaging to ship the equipment is
preferable.
In case other package should be used, ensure to wrap the instrument in
heavy paper or plastic.
Use a strong shipping box and use enough shock absorbing material all
around the equipment to provide a firm cushion and prevent movement in
the shipping box; in particular protect the front panel.
Seal the shipping box securely.
Mark the shipping box FRAGILE to encourage careful handling.
2.8 Equipment Cleaning
Use a clean, dry, non abrasive cloth for external cleaning of the equipment.
To clean the equipment do not use any solvent, thinner, turpentine,
acid, acetone or similar matter to avoid damage to external plastic or
display surfaces.
2.9 Equipment
ventilation
To allow correct equipment ventilation ensure that the vent grids on
the rear panel and on the bottom of the receiver are free by any
obstructing object.
In order to avoid the unwanted tripping of the protection devices, an
insulation transformer shall always be used between the mains supply
and the built-in LISN.