NARDA PMM 7010 Series, Руководство пользователя

Страница: 15 / 76

General Information 1-7
1.10 Functional
Description
The PMM 7010 features a completely new receiver architecture based on
the most recent DSP and FPGA technology.
1.11 Fast and precise
measurement This measurement system has been designed for use on any PC with the
Windows
™
operating system.
The PMM 7010 pre-compliance measurement system allows the designer
to measure the conducted and radiated interferences of a prototype under
test as part of the daily routine.
In the CISPR bands A (9 kHz ÷ 150 kHz), B (150 kHz ÷ 30 MHz), C (30 ÷
300 MHz) and D (300 ÷ 1000 MHz) the standards requires the use of
specially shaped 200 Hz, 9 kHz, and 120 kHz filters.
Thanks to its architecture and to the large internal computation capability,
the PMM 7010 can perform the entire band test in a short time.
This feature is not only useful to greatly increase the productivity of the test
lab, but also to make better and more comprehensive analysis in case the
disturbance to be evaluated is somehow intermittent and with an irregular
repetition rate.
PMM 7010 makes use of internal numerically modelled filters in
compliance with the norms, using FFT and FIR techniques.