NARDA L3HARRIS SMARTS II, Руководство по эксплуатации

Страница: 23 / 40

4 Operation and installation
SMARTS II 23

Alarm Indications
– either the internal audible and visual alarm
indication and/or a remote indication can be used. External alarms
require a cable connection.

Remote Test
– available with a cable connection.

Enable
– alarm operation can be inhibited when people are not
present during high power operation.
4.3 Mounting the SMARTS II
The SMARTS II is attached with two screws. The type and size of the
screws are determined by the mounting surface. The SMARTS II can be
attached to any surface, even conductive metal surfaces.
4.4 Basic battery operation
The SMARTS II can be used in its basic form by operating from the
internal U9VL battery and the built-in audible and visual alarm indication.
No external connections are required.
To operate the SMARTS II from a battery without
external connections
1. Remove the battery-compartment cover by loosening the four
captive screws. The screws should only be finger tight but a slot
is provided for a screwdriver should it be needed.
2. Connect the battery. The monitor is shipped with the battery
supplied in a separate package to maintain battery life while in
storage and during shipment.
3. Move the BATT
–PS
switch (battery
–power supply), which is
located inside the battery compartment, to the BATT position.
4. Set the alarm threshold to the desired level. See 4.6 Alarm
threshold adjustment.