NARDA L3HARRIS SMARTS II, Руководство по эксплуатации

Страница: 11 / 40

2 Preparing the SMARTS II for use
SMARTS II 11
2.2 Unpacking
Packaging
The packaging is designed to be re-used as long as it has not been
damaged.

Keep the original packaging and use it whenever the monitor needs
to be shipped or transported.
Package contents

Check that all the following items have been delivered:

SMARTS II area monitor (selected model corresponding to the safety
standard to be measured)

Mating 9-pin connector:
o
Connector - D-SUB
o
Backshell - D-SUB

Battery, Ultralife U9VL lithium

Operating manual

Test report
Checking the device for shipping damage
After unpacking, check the device and all accessories for any damage
that may have occurred during shipping. Damage may have occurred if
the packaging itself has been clearly damaged. Do not attempt to use a
device that has been damaged.

Check for completeness as well as any transport damages.
⚠
WARNING
Underestimation of the
electromagnetic field
Risk of personal injury or death to persons at
risk as well as permanent damage to the device

Do not operate a damaged device
In the event of an incomplete delivery and damages to the monitor or
accessories, please contact your Narda sales partner. You can find the
Narda sales partner responsible for you on the Narda website at
www.narda-sts.com .
Recovery after shipping and storage
Condensation can form on a device that has been stored or shipped at a
low temperature when it is brought into a warmer environment. To
prevent damage, wait until all condensation on the surface of the device