NARDA L3HARRIS SMARTS II, Руководство по эксплуатации

Страница: 12 / 40

2 Preparing the SMARTS II for use
12 SMARTS II
has evaporated. The device is not ready for use until it has reached a
temperature that is within the guaranteed operating range. For
temperature ranges see the corresponding datasheet which can be
downloaded at
www.narda-sts.com/smarts-ii/ .
⚠
WARNING
Underestimation of the
electromagnetic field
Risk of personal injury or death to persons at
risk as well as permanent damage to the device

The monitor is not ready for use until it has
reached a temperature within the operating
range. (see corresponding datasheet at
www.narda-sts.com/smarts-ii/ )
2.3 Operation
Electrical voltages are present inside the device.
!
Do not bring the device into contact with live parts.
!
Do not open the device. Opening the device invalidates any
warranty claim.
!
Only use accessories intended for the device.
Operation of a damaged device or component may result in significant
measurement errors and consequential damages.

Before using the monitor, check the sensors with a test source for a
proper functionality. This particularly applies to the thermocouple
sensors, which can be affected by different mechanical stresses and
environmental influences.

Always try to inform yourself of the frequencies and field strengths
that you could be expected to encounter.
!
Check the device and components regularly for damage.
Cracks or fractures in the housing indicate possible damage
to the sensors.
!
In the event of damage or suspected malfunction, take the
monitor out of operation and contact your local sales
partner. Addresses can be found on the Internet under
www.narda-sts.com