NARDA L3HARRIS SMARTS II, Руководство по эксплуатации

Страница: 25 / 40

4 Operation and installation
SMARTS II 25
8. Mount the monitor in the desired location using the holes in the
mounting brackets and screws suitable for the surface that the
monitor is being mounted on.
Connector, D-subminiature male:
⚠
CAUTION
Underestimation of the
electromagnetic field
Risk of personal injury and malfunction of the
device

Use shielded cable to make connections to the
input/output connector
4.6 Alarm threshold adjustment
The alarm threshold can be set to any one of four values: 10%, 25%,
35%, or 50% of Standard. The default setting is 50% of Standard.
To change the alarm threshold
1. Remove the battery-compartment cover by loosening the four
captive screws. The screws should only be finger tight but a slot
is provided for a screwdriver should it be needed.
2. Adjust the two-section DIP-switch located inside the battery
compartment to set the alarm threshold to the desired level. Use
the diagram on the inside of the battery compartment cover to
determine the correct setting for each section.