W415-2034 / A / 10.18.19
EN
36
venting installation
5.6
vent shield installation
The vent shield is telescopic and must be adjusted to shield the fi rst 30” of vertical vent always used.
FOR SEE-THRU APPLIANCES, REPEAT STEPS WITH THE OPPOSITE SIDE (2 vent shields required).
Fig. 1
Fig. 2
1. Unscrew the fasteners on the vent shield assembly. DO NOT DISCARD FASTENERS
(Figure 1)
.
2. Adjust the vent shield to its maximum vertical
(Figure 2)
.
3. Use the fasteners in step 1 to hold the new vent shield height
(Figure 3)
.
4. Unscrew the fasteners as shown
(Figure 4)
. DO NOT DISCARD FASTENERS
5. Use the fasteners in step 4 to secure the vent shield to the appliance
(Figure 5)
.
6. Secure the vent shield with two fasteners (supplied) to the front upper frame
(Figure 6)
.
note:
Fig. 4
Fig. 5
SEE-THRU EXAMPLE
Type 1 (x2)
For ease of installation, the front frame can be removed. The front frame must be
reinstalled prior to installing the nailing tabs.
important:
Front of
appliance
Fig. 3
Содержание Vector Series
Страница 77: ...EN W415 2034 A 10 18 19 77 17 0 notes...
Страница 155: ...W415 2034 A 10 18 19 151 FR 17 0 notes...