Archgard AGDV-38 Installation And Operating Instructions Manual Download

Page: 1 / 26

MODEL MARQUIS AGDVT-38/AGDV-38

DIRECT VENTED BUILT-IN

GAS FIREPLACE

FOR USE WITH NATURAL GAS AND PROPANE

INSTALLATION AND OPERATING INSTRUCTIONS

FOR YOUR SAFETY

DO NOT store or use gasoline or any other flammable vapors or liquids in the vicinity
of this or any other appliance

IF YOU SMELL GAS:
- Do not try to light any appliance.
- Open windows.
- Do not touch electrical switches.
- Extinguish any open flame.
- Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier’s

instructions.

- If you cannot reach the gas supplier, call the fire department.

PLEASE READ INSTRUCTIONS CAREFULLY BEFORE INSTALLING AND

OPERATING THE APPLIANCE

WARNING:

Improper installation, adjustment, alteration, service or maintenance voids

all the manufacturer’s warranties and may cause property damage, personal injury or
loss of life.

Installation and service must be performed by a qualified installer, service agency or the
gas supplier.

Installer, please leave this manual with the appliance owner for future reference.

WARNOCK HERSEY

CERTIFIED FOR CANADA AND USA

NOT FOR USE WITH SOLID FUEL

200-0044

24MAY01

f i r e - p a r t s . c o m

Summary of Contents for AGDV-38



























Search results

Summary of Contents for AGDV-38

Reviews:

Related manuals for AGDV-38

Brands by name

Popular brands

Archgard AGDV-38, Installation And Operating Instructions Manual

Search results

Summary of Contents for AGDV-38

Reviews:

Related manuals for AGDV-38

Brands by name

Popular brands