34
Using the iLock App
Lock Settings
Lock ID
(Lock Serial Number): Displays the physical lock's
unique serial number assigned and programmed into the
lock firmware at the factory. Networx locks are identified
in DL-Windows by this unique serial number.
MAC Address:
Displays the unique 12-digit MAC address of the Blue-
tooth radio module of the selected lock.
Slot Number
Used interchangeably with
User Number
, this number
represents the location within the lock's internal program-
ming memory. The location and therefore the Slot Num-
ber determines the abilities of that User. The first two
Bluetooth Users are always added to slots 7000 and
7001 respectively; these Users have Administrative
rights. All subsequently added Bluetooth Users (7002 -
7026) are "Basic" Users. For more information about
ArchiTech User Number Definitions, see page 7.
Battery
Indicates the latest percentage of remaining usable ca-
pacity of the battery in the selected lock, (updated upon
each successful communication).
Important:
The per-
centage will equal zero upon a Low Battery Warning indi-
cation (see page 37 and 40), therefore 50% represents
halfway to a Low Battery state .
Change Lock Name
Displays existing Lock Name created in step 5 in
"Enrolling Bluetooth Credentials" above. Upon selection,
smartphone keyboard will appear allowing changes.
Note:
Tap "
Save Changes
" to retain all edits.
"Save My Password" Feature
Checked (enabled) by default, password created in step
5 in "Enrolling Bluetooth Credentials" above is not re-
quired for each unlock request. When unchecked
(disabled), each time the Unlock Button is selected from
the home screen a prompt will appear to enter your
password.
Save Changes
Retains changes to the Lock Name or the "Save My
Password" Feature.
Delete Lock
Removes the selected Networx lock from the iLock app.
iLock App: "Settings" screen
iLock App: "Lock Settings" screen (see below)
