Nanosurf easyScan 2 AFM, Руководство по эксплуатации

Страница: 57 / 164

S
TORING THE MEASUREMENT
57
Storing the measurement
When you are satisfied with your image and would like to keep it, you can
take a snapshot of it by clicking the
button. The behaviour of this
button depends on whether a measurement is in progress or not.
When a measurement is in progress, and is activated, a copy of the
measurement is made to a measurement document after the measurement
is finished.
When the measurement is not in progress, a copy is made immediately.
If you would like to take the snapshot of the measurement as it appears
during the measurement without waiting to finish:
Stop the scanning by clicking .
- Generate a snapshot by clicking .
If you want to save the measurement document to your hard disk drive, for
example for loading it to Nanosurf Report:
- Activate the measurement document by clicking in its window, or by
selecting it in the ‘Windows’ menu.
- Select the menu ‘File>Save as...’. Select the folder and name where you
would like to store the measurement.
The stored measurements can now be loaded with the easyScan 2 AFM
software or the optional Nanosurf Report and Nanosurf Analysis software
packages for later viewing, analysis and printing. For more information on
starting the Report software, see section
Creating a report (p.153).
Creating a report
The optional Nanosurf Report software can be used for evaluating the
measurement, and creating visually appealing reports. Here, we will just
start the software and create a basic report. For an in depth introduction to
the Nanosurf Report software, refer to the Introduction section of the
Nanosurf Report online help.
To start Report: